Nyheder

Importance of Rust Prevention Measures for Multi-function CNC Wood Lathe

Importance of Rust Prevention Measures for Multi-function CNC Wood Lathe

2022-07-22 13:48:53

Multi-function numerical control wood lathe is a widely used wood processing machine, and it is also the embodiment of the application of numerical control technology in the wood lathes. The woodwork processing of multi-function CNC wood lathe has realized automation, making the production process more efficient and fast. However, in the process of use, we should also pay attention to the maintenance of the lathe, and not let the multi-function CNC wood lathe be rusted due to negligence.

 

CNC WOOD LATHE

 

So how should we do the rust prevention work of many functional CNC wood lathes?

 

  1. In the surface treatment process of multi-function CNC wood lathe, the quality of antirust paint application depends largely on the cleaning degree of the equipment surface. If there are pits, welding spots, and stripes on the original surface of the equipment, it will cause some expansion and spot dropping after the antirust paint is applied. As the saying goes, the Bank of thousands of miles collapses in the ant nest, and some small spots will gradually extend to other paint layers, reducing the service life of the antirust paint. To deal with the metal surface, it must be degreased, washed in hot and cold water, washed in acid, phosphate, etc. after drying, the adhesion between the antirust coating and the metal surface will increase by more than several times. Among them, degreasing and phosphating, two chemical treatments, are very important, and generally do not omit them without permission.

 

  1. Multi-function CNC wood lathe coating process, now coating the surface of equipment, many enterprises use air spraying technology. Although there are some limitations in the process of using advanced technology, it can be applied in some aspects. For example, some large state-owned enterprises have formed a special spraying line, a process operation, which can enter the next processing link before the paint film is dry.

 

  1. The coating process management and quality inspection of multi-function CNC wood lathe are important processes before the equipment leaves the factory. The quality control and measurement methods developed in the management process mainly inspect the coating through the radiographic detector to prevent the unqualified coating from leaving the factory and affecting the corporate image.

 

How to choose a good CNC wood machine tool?

 

  1. Select cutting parameters reasonably. Whether the selection of cutting parameters is reasonable or not plays an important role in giving full play to the potential of machine tools and cutting performance of tools, and realizing high-quality, high-yield, low-cost and safe operation. The selection principle of turning parameters is: when rough turning, first consider selecting a back cutting amount as large as possible, then select a larger feed amount, and finally determine a suitable cutting speed.

 

  1. The selection of cutting tools, especially blades, is an important link to ensure the processing quality and improve the processing efficiency. The cutting performance of the part material, the blank allowance, the dimensional accuracy and surface roughness requirements of the workpiece, and the automation degree of the machine tool are all important basis for selecting the blade.

 

  1. CNC lathes can also be used for rough and fine turning. Therefore, when rough turning, tools with high strength and good durability should be selected to meet the requirements of large back cutting and large feed during rough turning. When finishing turning, we should choose tools with high precision and good durability to ensure the requirements of machining accuracy. In addition, to reduce the time of tool change and facilitate tool setting, machine clamped knives and machine clamped blades should be used as much as possible. The way of clamping the blade should be selected reasonably, and the coated cemented carbide blade is the best choice.
 
For more information about 5 axis cnc wood machining services, wood cnc machining near me, cnc wood machining services near me, plz feel free to contact us.
Kontakt os
Navn

Navn can't be empty

* E-mail

E-mail can't be empty

telefon

telefon can't be empty

Selskab

Selskab can't be empty

* Besked

Besked can't be empty

Indsend